After the system begins to boot from the USB stick or Ethernet adapter, release the Volume Down button.Ensure the Surface device is powered off.You can alter the boot order in the system firmware to prioritize USB boot devices or boot from an alternate boot device during the boot-up process. To boot from the network or a connected USB stick, you must instruct the Surface device to boot from an alternate boot device. To use a third-party Ethernet adapter, you must load the drivers into the deployment boot image, and you must launch that boot image from a separate storage device, such as a USB stick.

Third-party Ethernet adapters are also supported for network deployment, although they don't support PXE boot. Docking Station for Surface Pro and Surface Pro 2.Surface USB 3.0 to Gigabit Ethernet Adapter.Surface USB-C to Ethernet and USB 3.0 Adapter.The following Ethernet devices are supported for network boot with Surface devices: Microsoft Ethernet adapters, such as the Surface Ethernet Adapter and the Surface Dock, use a chipset compatible with the Surface firmware. The chipset in the Ethernet adapter or dock must be detected and configured as a boot device in the firmware of the Surface device. For more information on potential conflicts with shared adapters, see Manage MAC addresses with removable Ethernet adapters later in this article.īooting from the network (PXE boot) is only supported when using an Ethernet adapter or docking station from Microsoft.

In that case, you may also want to consider whether the removable Ethernet adapters will be dedicated to a specific Surface device or shared among multiple devices. Suppose you're pre-staging clients with Windows Deployment Services (WDS) or using Microsoft Endpoint Configuration Manager. When selecting Ethernet adapters, the primary concern is how adapters will boot your Surface devices from the network. Select an Ethernet adapter for Surface devicesīefore you can address the concerns of how you'll boot to your deployment environment or how devices will be recognized by your deployment solution, you have to use a wired network adapter. Due to the lack of a native wired Ethernet adapter, administrators must provide connectivity through a removable Ethernet adapter. Network deployment to Surface devices can pose some unique challenges for system administrators. This article describes how to perform a network deployment of the latest Surface devices including Surface Pro 3 and later.

How to find dell laptop mac address